Who it is for

Thermal evidence for the firms that sign the report.

Your team already tests and reports on building envelopes. I turn a thermal drone flight into located, measurable evidence; the assessment and the client stay yours.

  1. 01

    Condition assessments and reserve studies

    Capture the whole facade and roof in one measurable 3D record, with anomalies sized and located for capital planning reports.

  2. 02

    Forensic and moisture investigations

    Trace each thermal anomaly back to its 3D coordinates and the original thermal and visible photographs that saw it.

  3. 03

    Pre-remediation and quality checks

    Measure each anomaly's surface area in m² before repairs go to tender, and record the envelope again once the work is done.

One anomaly on the roof of an example building, marked in the 3D thermal record, and below it the thermal and visible photographs that saw it, with the same spot circled The anomaly's card in the viewer: warmer than its surroundings by 4.04 °C, 0.232 m², 0.68 × 0.56 m, median 20.09 °C, marked needs attention, with buttons to mark it reviewed, deferred or excluded
One anomaly in the viewer: where it sits in the 3D record, its size and temperature difference, and the thermal and visible photographs that saw it, with the spot marked in each.

Whole-building envelope surveys

From 185 photographs to 5 anomalies that need attention.

On the example building in the live demo, 185 thermal photographs became a single 3D record.

Visible Thermal
The example building from the live demo, filmed by the drone that captured it: the same view in visible light and in thermal.

42.6 million

Temperature readings, each placed on the building in 3D.

52 to 5

52 spots flagged, narrowed to 5 anomalies that need attention, made up of 7 spots.

8

Anomalies set aside for further review, kept out of the main list.

Who is behind it

Built in the field, checked on the ground.

I am Josh, based in Calgary. I have spent hundreds of hours flying sites and checking the results on the ground against thermocouples and a handheld thermal camera, alongside building the software.

I stand behind the observations and the data recorded; what they mean for the asset is the client's call. What I know is this system, and how far its readings can be trusted.

Josh Moellenbeck flying a DJI thermal drone in a mountain meadow at dusk A reference target with thermocouples taped to it, a thermocouple data logger, a handheld thermal camera, an irradiance sensor, a temperature controller and a DJI drone laid out on a wooden floor

How a project starts

Start with one building.

  1. 01

    A free suitability check

    I check the building's geometry or a few sample thermal photographs, at no cost. If the data will not give a record you can rely on, I tell you before you spend anything.

  2. 02

    The capture

    I fly the building, or process photographs your team already has.

  3. 03

    A pilot project

    One building, scoped and priced up front, delivered within 5 business days* of receiving the photographs as a private link to the viewer and reports, with the raw data files included: the .laz point cloud and the DXF and E57 exports. For a processing-only pilot, you can preview the record before you pay.

  4. 04

    Your team reviews

    In the viewer, or exported to the formats and tools you already use.

* Can vary with project complexity, and if travel is required.

Common questions

Practical questions.

Does this replace a professional assessment?

No. The record gives your team located, traceable thermal evidence for its assessment. Thermal observations alone do not establish a diagnosis.

Do we need our own drone?

No. If you don't fly, I can, or I can help you arrange a flight in Western Canada. If you already fly a DJI radiometric thermal drone, send me the photographs.

Does our team need to install anything?

No. The record opens in a web browser from a private link. The files are also yours to open in your own software.

Where are you based?

Precision Flight Data is based in Calgary and can process data from anywhere. If you don't fly, I can, or I can help you arrange a flight in Western Canada.

What happens to our data if we stop using the web viewer?

You keep it. Every project includes the radiometric .laz point cloud, with a temperature for each point cross-checked across multiple thermal views, the DXF and E57 exports and the original thermal and visible photographs. All of it opens in your own software, without the viewer.

How do you handle thermal drift?

Rather than relying on a single photograph, every point on the building is cross-checked across multiple views that observed the same place. Observational abundance and agreement negate thermal drift (unless your sensor is drifting more often than it is stable). Inconsistent readings stay in the record, marked so they are easy to find and filter. The screening leaves them out, so they never become anomaly findings, but nothing in the record is deleted.